Dyson TP07 vs HP07: Cooling Purifier or Purifier With Heater?

Last updated: October 21, 2026

Disclosure: As an Amazon Associate we earn from qualifying purchases. This does not change what we recommend. See our affiliate disclaimer.

The Dyson Purifier Cool TP07 and Purifier Hot+Cool HP07 share the same core idea: a bladeless purifying fan with HEPA H13 filtration, a carbon layer for gases, auto mode and app control. The main difference is that the HP07 can also heat the room, while the TP07 is a fan and purifier only. Everything else, including size and shape, follows from that.

The details below come from Dyson’s own product pages. Dyson lists both pages as currently out of stock, and the HP07 page says Dyson no longer sells it and points to a newer model. We have not tested these products ourselves and we do not list prices, so check current availability and specifications before you decide.

Key Takeaways

• The key difference is heating: Dyson states the HP07 heats the room, while the TP07 is a purifying fan only.
• Both pages state HEPA H13 machine sealing, a carbon layer, 350 degree oscillation, 10 speeds and about a 12-month filter interval.
• Dyson does not publish a noise figure or a room size on these pages, so compare independent CADR data if you need it.
• Both pages show the models out of stock, and the HP07 page says Dyson no longer sells it.
• Heating control is on the remote, not in the app, according to the HP07 page.

Size and Placement at Home

The TP07 stands about 41 inches tall and the HP07 about 30 inches, so the TP07 reaches higher and the HP07 sits lower. Height affects where the airflow lands: a taller tower can project over a bed or sofa, and a shorter unit tends to work better beside a desk or on the floor in a small room.

Both need clear space around them. Keep the unit at least a few feet from walls and furniture where practical, away from curtains and out of reach of children and pets. The base should sit on a hard, level surface. A purifier tucked behind a chair or in a corner cannot circulate air through the room.

Running Costs to Think About

The recurring cost is the filter, which Dyson says needs replacing roughly every 12 months depending on use. Multiply that by the number of years you plan to own the unit. The HP07 also draws more power when heating, so winter electricity use will be higher than for a fan-only unit.

We do not list prices, so compare current figures on the retailer page and weigh them against alternatives that publish a clear CADR and a lower filter cost.

Alternatives to Consider

If your main need is filtering the air in a bedroom or living room, a conventional purifier with a published smoke CADR can clean a room of a known size for less. If you want heating, a standalone heater plus a purifier is another route, and it lets you replace each device separately. A fan-purifier hybrid appeals mostly to people who value the combined design and the Dyson app.

For allergy season, wildfire smoke or pet dander, pick based on CADR and filter quality first, then on features. For smoke from wildfires, close windows, run the unit continuously and keep an eye on the local air quality index.

Safety and Health Notes

Treat any heater with caution. Never cover it, never leave it running where something can fall on it and never use it to dry clothes. If you notice a burning smell, unusual noise or damage, unplug it and contact the manufacturer.

Purifiers reduce particles in a room. They do not replace ventilation, source control or medical care. For carbon monoxide alarms, gas smells or heavy smoke, leave the area and get help. This article gives general information and is not medical advice.

How to Verify Before You Buy

Open Dyson’s current product page for the exact model and note the filter type, the stated warranty and the availability message. Then look for an independent test that lists the smoke CADR and measured noise, since Dyson does not publish them on these pages. Finally, check that replacement filters are in stock and that the retailer’s return policy covers a unit that does not meet your needs.

Models change, are renamed or are discontinued, and retailers sometimes list older stock under current names. Treat this comparison as a starting point, and rely on the manufacturer’s page and your own room measurements for the final decision. If a figure here differs from the current listing, trust the listing.

Air Purifiers to Compare

The table below lists purifiers from our affiliate partner. Compare each model’s smoke CADR, room size rating, filter cost and features against Dyson’s fans, and check current availability.

Side-by-Side

The table summarizes what each page states. Dyson does not publish a noise figure or a room size on these pages, so we do not give one.

What Dyson States for the TP07

Dyson describes the TP07 as a purifying fan. Its filter is a combined glass HEPA and activated carbon unit, and the page says the whole machine, not just the filter, meets the HEPA H13 standard, capturing 99.97% of particles at 0.3 microns. The carbon layer is described as removing odors and gases, including VOCs.

It oscillates up to 350 degrees, has 10 speed settings and an Auto mode that senses pollutants and shows live air quality on an LCD or in the MyDyson app. The page lists a Night mode, voice control with compatible services and a roughly 12-month filter replacement interval depending on use. Dimensions are about 41 inches tall by 8 inches wide and 4.7 inches deep, weighing about 11 pounds, with a 2-year limited warranty.

What Dyson States for the HP07

The HP07 uses the same HEPA H13 and carbon approach and the same 350 degree oscillation with 10 speeds, and adds a heating function that Dyson says heats the whole room evenly. Dyson notes that heating and temperature control are not available in the app and that you need the remote for them.

Its stated dimensions are about 30 inches tall by 8.1 inches wide and 5.1 inches deep, with a weight of about 12.5 pounds and the same 2-year limited warranty. The page notes the HP07 is no longer sold by Dyson, which matters if you are looking for a long-term supply of filters and support.

Who Should Choose the TP07

The TP07 makes sense if your main goals are cleaner air and a cooling breeze, and you already have heating from another source. A fan-only design is simpler, and its taller tower shape can fit beside a bed or sofa without taking much floor space.

If you only run a purifier in warm months, or you have central heating you prefer, paying for a heating element that you would rarely use makes less sense.

Who Should Choose the HP07

The HP07 suits people who want one device to filter the air and warm a room. A bedroom or home office with a cold corner is a typical use. Remember that Dyson says temperature control is on the remote rather than in the app, so you may need to keep the remote handy.

A heater adds safety considerations. Keep it away from curtains, bedding and anything that can block the output, and follow the manual. Do not use any heater in a way the manufacturer does not approve.

A Note on Dyson’s Purification Claims

Dyson states that the machine is sealed to the HEPA H13 standard and that the filter captures 99.97% of 0.3 micron particles. The page also says gas capture rates vary, so the carbon layer should be seen as helping with some odors and gases rather than removing every smell or chemical.

The pages do not list a CADR or a room size. If you want to size the unit to your room with the usual two-thirds rule, look for independent test data for the exact model before you buy.

Fan Airflow Versus Purifier Airflow

Because both models are designed as fans, some of the airflow is directed at you, which can feel cool in summer and annoying in winter. Dyson notes the TP07 is not an air conditioner. In cold weather, use oscillation or a lower speed to avoid a draft. The Night mode, which Dyson describes as using the quietest settings and a dimmed display, is helpful for a bedroom.

Support and Spare Filters

The HP07 page says Dyson no longer sells that model, and the TP07 is listed as out of stock. Before buying either one second-hand or from a retailer, check that Dyson still offers the matching filter and support. A purifier without available filters is not worth much.

How to Choose

1. Decide whether you need a heater at all.
2. Look at the smoke CADR or independent room rating, because Dyson does not list a room size.
3. Confirm replacement filter availability and cost.
4. Check how loud the unit is at the speed you will use.
5. Avoid ozone-generating modes; the EPA advises against ozone-emitting air cleaners.

Honest Limits

• This guide uses manufacturer information and public guidance from the EPA and AHAM, not our own lab tests.
• Features and room ratings change between model years, so confirm on the listing before you buy.
• A purifier is not a medical device and does not replace medical advice or treatment.

Who Should Skip This

When to See a Professional

Frequently Asked Questions

What is the main difference between the Dyson TP07 and HP07?

Dyson states that the HP07 adds heating, while the TP07 is a purifying fan only. Both use HEPA H13 and carbon filtration.

Is the Dyson HP07 still sold?

Dyson’s product page says it no longer sells the HP07 and links to a newer model. Check current retailers and availability.

How often are the filters replaced?

Dyson says roughly every 12 months depending on use, and the machine or app alerts you.

Can I control heating in the app?

The HP07 page says heating and temperature control are not available in the app and you should use the remote.

Do the Dyson pages give a room size?

No. Dyson markets both as whole-room purifiers but does not list square footage on these pages.

Bottom Line

The TP07 is purification plus cooling airflow, and the HP07 adds heating.

Both are listed as out of stock, so verify availability and the newer model before buying.

Related reading: sens,fan,bed

Sources: EPA, Guide to Air Cleaners in the Home; AHAM Verifide.